DNA Air Filter for Polaris ATV/Quads

  • Sale
  • Regular price $169.00
Tax included. Shipping calculated at checkout.

The filter listed below fits a range of Polaris ATV's:

  • 2004-2005 ATP 500 HO
  • 1999-2001 Diesel 455 4x4
  • 2000-2001 Magnum 325 2x4 and 4x4
  • 1999-2003 Magnum 500 4x4
  • 2001 Ranger
  • 2002 Scrambler 500 2x4
  • 1997-2008 Scrambler 500 4x4
  • 2008 Sportman X2 700
  • 2000-2001 Sportsman 325
  • 1999-2001 Sportsman 335
  • 2001 Sportsman 400 2x4
  • 2001-2005 Sportsman 400 4x4
  • 2008 Sportsman 400 HO
  • 2006-2007 Sportsman 450
  • 2000-2008 Sportsman 500 6x6
  • 2007 Sportsman 500 6x6 MV
  • 1996-2002 Sportsman 500
  • 2006-2008 Sportsman 500 EFI
  • 2008 Sportsman 500 EFI Touring
  • 2002-2008 Sportsman 500 HO 4x4
  • 2004 Sportsman 500 HO Mossy Oak
  • 2006 Sportsman 500 X2
  • 2003 Sportsman 600 4x4
  • 2004-2005 Sportsman 600 Twin
  • 2002-2003 Sportsman 700 4x4
  • 2005-2007 Sportsman 700 MV7
  • 2004-2006 Sportsman 700 Twin
  • 2004-2007 Sportsman 700 Twin EFI
  • 2008 Sportsman 800 EFI HO and Touring
  • 2005-2007 Sportsman 800 Twin EFI
  • 2007-2008 Sportsman X2 500 EFI
  • 2007 Sportsman X2 800 EFI
  • 2000-2001 Trail Boss 325 4x4
  • 2000-2002 Xpedition 325
  • 2000-2002 Xpedition 425
  • 1997 Xplorer 500 4x4

The DNA high performance air filter is a high quality next generation multilayer cotton gauze oil impregnated air filter. The filter media is made of 4 layers of high quality nafta surgical cotton gauze specially designed by the R&D department.

The cotton is sandwiched between two layers of epoxy coated marine grade aluminium wire mesh, designed to last a lifetime. The 4 layers of cotton and the two layers of wire mesh are pleated by state of the art electronically controlled pleating machines to assure a very high quality of the final filtration media.

The result of the special design and hi tech manufacturing process is a filtration media that has very high flow rates, low restriction, superior dust holding capability, smoothens out the air flow stream and lasts a life time.

The oil that is used by DNA to impregnate the cotton is a very special grade developed by their own R & D department after intense testing and produced by one of the world’s best oil companies. This special oil is a very critical part of the filter and has the capability to produce a static charge to the cotton media and attract the entire dust particles that flow towards the filter, even the very fine ones. DNA - the world leader in high performance air filters.

Cleaning the filter: With DNA filters you must use their service kit only and not any other brand cleaner or oil because of the material the filter is made of. Once you have applied a generous amount of the cleaner to the filter (soak for 10mins) and added a bit of water on the filter, the best thing to use is a small paint brush (25mm) and dab and brush the filter until it foams slightly and making sure to get into the "flutes" of the filter.Rinse occasionally as you are brushing (dirty side towards clean) repeat if necessary until filter is white in color and all cleaner is removed with thorough rinsing. ****Gently****  blow excess water off the filter with air gun and apply oil as per instructions on the service kit box, (DNA-DSK-2000). The filter should appear all red in color once oil is applied and make sure all nooks and crannies are covered in oil. Be careful not to "over oil" the filter because you may end up with a pool of oil on the ground under your bike and on the header pipes as the oil has run off the filter and out of the airbox drain.